hot mold
英 [hɒt məʊld]
美 [hɑːt moʊld]
网络 热模
双语例句
- The application of hot runner stack mold will spare the labor and equipment, raise the efficiency and stabilize the quality of products.
利用叠层式热流道模具可以实现人力与设备的节省、效率的极大提高和制品质量的稳定。 - Hot runner system technology and the application of hot runner on the design of plastic mold.
介绍了热流道系统技术计及热流道产品在注塑模具设计中的应用。 - Hot Runner Injection Mold for the PP Tissue Cover
PP纸巾盖热流道注射模 - The variation of mold dynamic friction force with oscillation curve was studied in hot experiment by mold simulator with servo hydraulic control oscillation system.
应用连铸结晶器凝固综合模拟装置，研究了结晶器瞬态摩擦阻力随结晶器振动的变化规律。 - Production of Iron Casting with Film-covering Sand Hot Corebox in place of Shell Mold
用覆膜砂热芯盒代替壳型工艺生产铸铁件 - A novel type of plastics PETG was tried to be used in hot embossing, in which the relief structures on a mold was transferred onto the surface of polymer under pressure at an elevated temperature beyond the glass transition temperature of the polymer.
通过将聚合物加热到其玻璃化温度以上，然后施加压力将模具上的图案转移到聚合物上的热压印成型方法，尝试一种新型塑料&PETG。 - Design of the newfashioned hot runner Stack Injection Mold
新型叠式热流道模具的设计 - Hyper-eutectic Cu-2.03% Cr alloy wires were cast by hot mold continuous casting process. Microstructure and mechanical properties of the as-cast alloy were studied. The relations between electrical conductivity, heat treatment time and heat treatment temperature for the alloy were investigated.
用热型连铸法制备过共晶Cu-2.03%Cr合金线，探讨了其在铸态下的微观组织形态、力学性能以及其电导率与热处理时间、温度的关系。 - Study on Hot Tearing of Steel Casting in No bake Furan Resin Sand Bonded Mold
自硬呋喃树脂砂铸钢件热裂的研究 - The Application of Hot& runner Technology of Plastics inJection Mold
塑料注塑模具热流道技术的应用 - Based on the phenomenon, the mechanisms of improving surface quality of continuous casting billets including high frequency and low amplitude mold oscillation, soft-contact mold electromagnetic continuous casting, hot top mold and so on were analyzed.
基于此温度波动现象，分析了包括高频小振幅振动、软接触结晶器电磁连铸、热顶结晶器等诸多技术改善铸坯表面质量的机理。 - Design of Double-level Hot Runner Stack Injection Mold for CD Case
CD包装盒叠层式热流道模具设计 - Microfabrication of Hot Embossing Metal Mold for Microfluidic Chip Based on No Back Plate Grow Method
基于无背板生长法的塑料微流控芯片热压金属模具的制作方法 - Base on the standard process, we have fabricated micro hot embossing metal mold and micro injection metal mold successfully by micro-electroforming.
在该标准工艺流程的基础上，通过后序工艺微电铸已成功制作出高质量的微热压模具和微注塑模具。 - A design method of hot runner mold for PET bottle base was proposed to extend the temperature range of PET resin for better processing.
为解决PET塑料加工温度范围较窄，工艺性较差的问题，提出了PET吹塑瓶坯热流道模具设计方法。 - The leakage reasons of molten plastics for hot runner mold are discussed in detail, the methods of preventing leakage are introduced from operation processing, seal design of hot runner system and assembly process of hot runner plate.
详细讨论了热流道模具熔体泄漏的主要原因，从操作工艺、热流道系统密封设计和热流道板装配工艺等3个方面介绍了防止熔体泄漏的措施。 - The hot runner injection mold structure design of PP tissue cover is introduced, and taking tissue cover as an instance, injection mold structure of the thermoplastic hot runner and its advantages are analyzed.
介绍了PP纸巾盖热流道注射模结构设计，并以纸巾盖为例分析了热塑性塑料热流道注射模具结构及优点。 - The typical structure of hot runner stack mold was introduced, with emphasis on the up-to-date developments of the technology.
在介绍叠层热流道模具的典型结构的基础上，着重阐述了当今国内外叠层热流道模技术的发展动态。 - But no relationship with smoking, drinking, amount of staple food, salt, gastric history, drinking polluted water, hot and fast eating habit and mold food et al.
而与烟酒、主食、食盐摄入量、胃病史、水源污染，热食快食、霉变食物等因素未显示相关性。 - Some effective measures to prevent hot tear, including avoidance of liquid metal to impact mold cavity and of casting-sprue-runner to form rectangular structure, were proposed during design of gating system.
在浇注系统设计时，避免金属液冲击型腔，避免铸件直浇道横浇道形成框形结构等也是避免热裂的有效措施。 - One of main reasons to result in casting hot tears is poor yieldability of the mold ( core), particularly when thin wall steel castings are produced by a no bake resin sand, the problem is more serious.
热裂产生的主要原因之一就是型（芯）砂容让性差，尤其是用自硬树脂砂生产薄壁铸钢件时，这个问题显得特别突出。 - There are two main way to drying wet pulp mold product, one is drying inside the mold and the other is using hot wind outside of the mold.
纸浆模塑制品的干燥方式主要有模内干燥和热风干燥两种方式。 - Recycle Method for the Chips of SiC_w/ Al Composite by Hot Mold-press
SiCw/Al复合材料切屑的热模压成形回收方法 - Seal and Assembly Process for Hot Runner mold
热流道注射模的密封与装配工艺 - Experiments for hot mold shell with isolated hot spot by local water quenching in investment casting before and after pouring were conducted.
对熔模铸件孤立热节热型壳进行了浇注前及浇注后局部水淬激冷试验。 - Experiments for Hot Mold Shell with Isolated Hot spot by Local Water Quenching in Investment Casting
熔模铸件孤立热节热型壳局部水淬试验 - Design of Heating System of Hot Runner for Heater Housing Mold
热水器外壳模具热流道加热系统的设计 - Design of hot runner injection mold for PET bottle base
PET吹塑瓶坯热流道模具设计 - Precision multi-position progressive die stamping designs in the applied more widely because of its design but because the more complicated, so in recent years in the hot mold design.
精密级进模在冲压设计中由于其应用性越来越广泛但是由于设计也较为复杂，所以是近年模具设计中的热点。 - In order to shorten the design circle of hot runner and decrease the rework probability of test mold, it is important to develop the design software on Hot Runner CAD.
开发热流道辅助设计软件对缩短热流道设计周期，降低试模返修率等具有重要的意义。